Explorer I
- 2,123
- First Name
- Tommy
- Last Name
- Watson
- Member #
-
30770
- Ham/GMRS Callsign
- GMRS - WROE242
- Service Branch
- USMC
I’ve been steadily making upgrades to my 2019 Toyota Tundra TRD Pro, and I thought I’d share her progress thus far.
-CBI Baja bumper, full overland skids, rock sliders, ditch light brackets
-Smittybilt 12k winch
-Baja Designs fog lights, light bar, ditch lights
-SDHQ 270amp 14v alternator
-Redarc BCDC with SDHQ dual battery system w/power steering and washer fluid reservoir relocations, Odyssey AGM’s
-Switch Pros with SDHQ center console control mount
-ICS Fab dash mount and phone holder + 67Designs iPad holder
-Wouxun KG1000G GMRS radio mounted inside the center console
-Decked drawer system with 12v sockets and USB ports wired into the passenger side rear corner pocket
-Alu Cab tilting fridge slide with Dometic DZ75
-RSI SmartCap with ceiling mounted camp table, Front Runner load bars up top
-3” lift with Fox 2.5 remote reservoir shocks, 700lbs coils, Total Chaos UCA’s, Toytec Progressive add a leaf
-Method 701’s with Cooper STT Pro 315/70r17
Up next is Nitro Gears 4.88s with front and rear lockers, proper leaf pack, Victory 4x4 dual swing out rear bumper, Front Runner roof rack, snorkel
*Note* I know my current spare tire placement is not ideal, it’s there temporarily until I get the Victory rear bumper.
-CBI Baja bumper, full overland skids, rock sliders, ditch light brackets
-Smittybilt 12k winch
-Baja Designs fog lights, light bar, ditch lights
-SDHQ 270amp 14v alternator
-Redarc BCDC with SDHQ dual battery system w/power steering and washer fluid reservoir relocations, Odyssey AGM’s
-Switch Pros with SDHQ center console control mount
-ICS Fab dash mount and phone holder + 67Designs iPad holder
-Wouxun KG1000G GMRS radio mounted inside the center console
-Decked drawer system with 12v sockets and USB ports wired into the passenger side rear corner pocket
-Alu Cab tilting fridge slide with Dometic DZ75
-RSI SmartCap with ceiling mounted camp table, Front Runner load bars up top
-3” lift with Fox 2.5 remote reservoir shocks, 700lbs coils, Total Chaos UCA’s, Toytec Progressive add a leaf
-Method 701’s with Cooper STT Pro 315/70r17
Up next is Nitro Gears 4.88s with front and rear lockers, proper leaf pack, Victory 4x4 dual swing out rear bumper, Front Runner roof rack, snorkel
*Note* I know my current spare tire placement is not ideal, it’s there temporarily until I get the Victory rear bumper.
Attachments
-
517.7 KB Views: 20
-
430.4 KB Views: 19
-
472.9 KB Views: 20
-
553.8 KB Views: 21