Trailer Build
- Thread starter Gravel Travel Canada
- Start date
Thank you very much. Been a slow project after buying the Jeep And the ice new car payment I didn’t have when I started the trailer build but all is good 90% done & will be done before September Colorado elk hunt
Corner caps cut and bentView attachment 49890View attachment 49891
Sent from my STH100-1 using OB Talk mobile app
Sent from my STH100-1 using OB Talk mobile app
Insulated the insideView attachment 49892View attachment 49893View attachment 49894
Sent from my STH100-1 using OB Talk mobile app
Sent from my STH100-1 using OB Talk mobile app
Loaded it up on a trailer to haul it to the fabricators commercial shop. Next weekend the corner caps get welded and attached, exterior paint and finish the interior.View attachment 49895View attachment 49896
Sent from my STH100-1 using OB Talk mobile app
Sent from my STH100-1 using OB Talk mobile app
Busy day prepping the exterior for paint. Choose a color and bought the paint. Sanded and cleaned the exterior aluminum. Fenders built. Bought quarter inch plywood for interior walls and ceiling. Hopefully tomorrow get corner caps completed and paint it. Maybe get plywood mounted inside.View attachment 50455View attachment 50456View attachment 50457View attachment 50458View attachment 50459View attachment 50460View attachment 50461
Sent from my STH100-1 using OB Talk mobile app
Sent from my STH100-1 using OB Talk mobile app
Off-Road Ranger I
Thanks, I underestimated the number of man hours it would require but it's an enjoyable way to spend the cold and snowy winter weekends.
Sent from my STH100-1 using OB Talk mobile app
Got the corner caps welded and installed with Silka 292i. Suspension installed, Timbren 3500 HD. Got a start on installing the panelling inside.
Next steps... finish fenders, exterior paint and finish interior panels.
Originally I had intended on pvc panels inside but the wood was so much cheaper.View attachment 50536View attachment 50537View attachment 50538View attachment 50539View attachment 50540View attachment 50542
Sent from my STH100-1 using OB Talk mobile app
Next steps... finish fenders, exterior paint and finish interior panels.
Originally I had intended on pvc panels inside but the wood was so much cheaper.View attachment 50536View attachment 50537View attachment 50538View attachment 50539View attachment 50540View attachment 50542
Sent from my STH100-1 using OB Talk mobile app
Member I
Thanks Don. Maybe two more weekends until it's complete if all goes well. Kinda fun to see a years worth of planning take shape.
Sent from my STH100-1 using OB Talk mobile app
Took a couple of weeks off from the build. Spent the day today working on it. Inside has all the plywood walls and ceiling installed. Prepped it for paint and painted it. Color didn't come out as expected, looks exactly like primer, was supposed to be darker tone and more silver than grey. I can live with it, should look better after the corner trims are painted black, fenders black, etc.
Plan for next weekend is to get the roof rack done, install the solar panel, paint the trim and mount the spare tire on the rear of the trailer..
The last phase will be a tongue box, mount a rotopax, traction ramps, a pelican case, awning, etc to the trailer.
So...two more weeks? Interior will get finished after that. Got a shake down weekend trail trip planned for late May before a 12, 000 km trip out west in the mountains of Alberta and BC which starts in early June.
My goal zero yeti 400 got destroyed over the winter so ordered a new 400 lithium one. The old one lasted for a few years and served me well, the lithium one will be a nice change (lighter, no worries of draining the battery, etc).
All in, I'll likely be in to the trailer for about 9000 Canadian dollars (7000 US?). A bit more than I was planning to spend but it should last for decades and will get lots of use.
View attachment 51924View attachment 51925View attachment 51926View attachment 51927View attachment 51928View attachment 51929
Sent from my STH100-1 using OB Talk mobile app
Plan for next weekend is to get the roof rack done, install the solar panel, paint the trim and mount the spare tire on the rear of the trailer..
The last phase will be a tongue box, mount a rotopax, traction ramps, a pelican case, awning, etc to the trailer.
So...two more weeks? Interior will get finished after that. Got a shake down weekend trail trip planned for late May before a 12, 000 km trip out west in the mountains of Alberta and BC which starts in early June.
My goal zero yeti 400 got destroyed over the winter so ordered a new 400 lithium one. The old one lasted for a few years and served me well, the lithium one will be a nice change (lighter, no worries of draining the battery, etc).
All in, I'll likely be in to the trailer for about 9000 Canadian dollars (7000 US?). A bit more than I was planning to spend but it should last for decades and will get lots of use.
View attachment 51924View attachment 51925View attachment 51926View attachment 51927View attachment 51928View attachment 51929
Sent from my STH100-1 using OB Talk mobile app
First test drive. I am impressed. Still a bunch to do but nice to have it rolling nowView attachment 52702View attachment 52703
Sent from my STH100-1 using OB Talk mobile app
Sent from my STH100-1 using OB Talk mobile app
Some more progress View attachment 53127View attachment 53128View attachment 53129View attachment 53130
Sent from my SM-A520W using OB Talk mobile app
Sent from my SM-A520W using OB Talk mobile app
Member I
Member III
Lights installed and spare tire mounted. Did a bunch of rv silicone sealing.
Sent from my SM-A520W using OB Talk mobile app
Sent from my SM-A520W using OB Talk mobile app
