Put it - in your tailgate mod

  • HTML tutorial

Drkhrts

Rank II
Launch Member

Enthusiast III

The longer you have your truck the more you tend to look at ways to use space better, my ram has a limited area under the back seat and I started adding some recovery gear that I found was taking up too much space. So i found a better unused space to use- with a little work.

2A27A897-564F-4ADF-99B6-708B0F58E3E1.jpeg
Most trucks have a type of access panel to get at the latch mechanism- I started with just looking at the opening, my ram actually has a shelf that runs through the middle of the tailgate making a good space for straps, or other soft items -
just need to make access easier.
695EF619-F80F-4333-BC6E-515FF62F0B5B.jpeg
With a little trimming of metal that was not connected to any mounting holes there’s enough room to get 20’ straps, a tree strap, and some rope. Need to just make sure your not going to get anything tied up in the rods for latches or the mechanism. I added some Home Depot hinges and some motor cycle body panel 1/4 turn latches. Other than the ugly hinges it’s hard to notice it. It’s not a huge space but it gets non essential stuff out of the cab, also I was going to do a spray in bed liner so I did not mind a little primmer.
B9253200-633E-47CA-8A3D-D2A7422B3C93.jpegBE0843C4-B807-463B-9C58-9887EBE66F08.jpeg644322BC-2A57-4A33-B0A2-74006C3A4F1B.jpeg26B7167A-FE18-4016-A968-45AC4E442823.jpeg
Depending on how yours Is laid out you may have more options- there’s lots of space around the beds of full size trucks that is wasted, start poking around.
 

Attachments

RoyB

Rank IV

Contributor II

1,010
Boston
First Name
Roy
Last Name
Bertalotto
Wow! That is awesome! You very smart man, grasshopper!....:blush:
 

PonoAdventures

Rank IV
Launch Member

Advocate I

1,308
Orange County, CA
First Name
Jason
Last Name
Nguyen
Member #

22713

Awesome mod! Very creative and wish I could do that with my tailgate, but mine has the Ford step (which surprisingly has been more useful than expected)
 

MOVE.OVERland

Rank IV
Launch Member

Enthusiast III

1,116
US
First Name
Jeremy
Last Name
Kelley
Member #

23058

Service Branch
Army vet
Dude I have been thinking about doing that for years! Good job man!
I did pull mine off and added a magnet to the cup holder part of it.