Jeep Commander interior cargo mods

  • HTML tutorial

Gotowork

Rank III
Launch Member

Advocate I

576
Perry, Ga. USA
Member #

9353

Have had the kitchen / storage drawer system built for a while now. Decided to add power and on board water tank. All of which will go under the drawers. With 2nd battery installed I ran 0/1 wire to the back cargo area. Have 1200 / 600w power inverter and fused power distribution. Currently installing air tank and compressor. Was able to fit a 21 gal. fresh water tank and pump under the drawer system.
20171215_110929.jpg
Have made some mods to the above pic. Added a second extension table. Which more than doubles table area as shown in pic. Did a dry fit with water tank and drawer system above it tonight. Pics are coming soon.
20180314_203051.jpg
 
Last edited:
  • Like
Reactions: Rusty burbin

Gotowork

Rank III
Launch Member

Advocate I

576
Perry, Ga. USA
Member #

9353

PSX_20180315_201657.jpg Have both tables in place to check the ergonomics and practicality of spacing. Want to be sure the water tank inlet and on/off discharge nob are in practicable locations.
 
  • Like
Reactions: Rusty burbin