I want to see the Rams
- Thread starter MOVE.OVERland
- Start date
Pioneer II
- 8,178
- First Name
- DALE
- Last Name
- FOLLETTE
- Member #
23055
- Ham/GMRS Callsign
- KJ7JDA
- Service Branch
- US Army CWO (Ret)
Enthusiast III
Been a while since I have been on here.... update..
2021 Rebel
Bilstein 6112/5160
Icon UCA
Icon Dual Rate HD rear springs
Hellwig Swaybar
Icon Alloy 18' wheels
MT Baja Boss A/T 34.5 x 12 x 18
AWE Tuning Exhaust
Spyder Industries Custom Rack
Backflip Revolver 4s cover
Go Rhino RB20 steps
Fitcam Dash Cam
Bulletpoint Mounts
2021 Rebel
Bilstein 6112/5160
Icon UCA
Icon Dual Rate HD rear springs
Hellwig Swaybar
Icon Alloy 18' wheels
MT Baja Boss A/T 34.5 x 12 x 18
AWE Tuning Exhaust
Spyder Industries Custom Rack
Backflip Revolver 4s cover
Go Rhino RB20 steps
Fitcam Dash Cam
Bulletpoint Mounts
Advocate I
Slowly setting up the Rebel. Ran wiring to the bed for the fridge, a 12v outlet and usb, and bed and under rack lights to see cargo with a switch in the bed. Installed an Auxbeam controller for adding lights up front, reverse lights in the bumper (with a diode so can run them when in reverse and also from the controller), and some general flood lights on the rack.
Attachments
Traveler III
- 1,847
- First Name
- Steven
- Last Name
- McCullough
- Member #
15897
- Service Branch
- USCG Retired
Pioneer II
- 8,178
- First Name
- DALE
- Last Name
- FOLLETTE
- Member #
23055
- Ham/GMRS Callsign
- KJ7JDA
- Service Branch
- US Army CWO (Ret)
Pioneer II
- 8,178
- First Name
- DALE
- Last Name
- FOLLETTE
- Member #
23055
- Ham/GMRS Callsign
- KJ7JDA
- Service Branch
- US Army CWO (Ret)
Biggoat1500
Rank I
Contributor I
Just getting started on my 97 1500. I have a 3000w inverter I plan to install with a dual battery setup in the bed. Still working on my plan. 
Pioneer II
- 8,178
- First Name
- DALE
- Last Name
- FOLLETTE
- Member #
23055
- Ham/GMRS Callsign
- KJ7JDA
- Service Branch
- US Army CWO (Ret)
Grover the Roamin Ram
Rank II
Enthusiast III
Here is my 22 Rebel
I don't have pics of the bed but it has the decked system which we use 1 drawer as a kitchen with the other being used for clothing.
We haven't done any major trips as of yet but have a plan for a longer one at the end of this month with 3 kids and 2 adults over 1000km.
We put 2 kids on cots in the vestibule and 1 tends to either sleep across the backseat (or floor) with the option of a one man military surplus tent depending on weather and terrain
I don't have pics of the bed but it has the decked system which we use 1 drawer as a kitchen with the other being used for clothing.
We haven't done any major trips as of yet but have a plan for a longer one at the end of this month with 3 kids and 2 adults over 1000km.
We put 2 kids on cots in the vestibule and 1 tends to either sleep across the backseat (or floor) with the option of a one man military surplus tent depending on weather and terrain
Pioneer II
- 8,178
- First Name
- DALE
- Last Name
- FOLLETTE
- Member #
23055
- Ham/GMRS Callsign
- KJ7JDA
- Service Branch
- US Army CWO (Ret)
Its a LEER contractor cap with barn doors. I am in the process of building a sleep platform / drawers for it.
LEER DCC
I got mine used for $800, it has barn doors with windows, cab side window and no side windows. If you go this route get the barn doors and wedge front, they are life changing. Check dealers and repo places there are tons of these around used.
ARE Builder
LEER is the brand I have but ARE and LEER are basically the same thing, there are only so many ways to make an aluminum contractor canopy. The ARE site builder is way better to see what your options are for heights, doors, lights, interior etc.
Shawn
Enthusiast III
Spent the Memorial Day weekend out in NE NM - Mills Canyon along the Canadian river
caycej
Rank III
Advocate III
