US Southeast Does anyone have photos of a Land Cruiser 200 with 17 inch TRD Pro wheels or other 17 inch wheels?
- Thread starter Phillip Comer
- Start date
The 5x150 TRD Pro wheels are 18”. There is a 17” 5x150 TRD wheel, Rock Warriors, that are very popular with the 200 series crew. Toyota discontinued them, and they are not cheap to come by.
I would recommend you visit www.urj200.com. There is a ton of top shelf knowledge, and a friendly group.
I ran 17” Methods for a while on my 200, but was displeased with the offset.
I would recommend you visit www.urj200.com. There is a ton of top shelf knowledge, and a friendly group.
I ran 17” Methods for a while on my 200, but was displeased with the offset.
They were a 0mm offset. The tread of tire was a little outside of the wheel well. Also, I’m not sure what the cause was, but the ride was very harsh, jarring even. I ran tire pressures as low as 30psi to see if made a difference, and it did not.
I switched to a +25mm, 18” version of the same wheel, and the ride is so much better.
Enthusiast III
Go here.
forum.ih8mud.com
200-Series Cruisers
2008-2021 : Lexus LX570 and 200-series Toyota Land Cruiser (J200)
forum.ih8mud.com
Enthusiast III
EVO Course wheels. More offset than the TRD and Tire Pressure sensors work. 
Very nice. 17s? What tire & size is that?
I like those bumpers too. Do you have a build thread?
Enthusiast III
Tires are 285 75 17. CBI Fab did the bumpers. No build thread.
Message me if you need info on the truck.
Message me if you need info on the truck.
Check out Icon wheels. They make a 17 x 8 with 5 x 150 lug pattern. They were designed for Toyota vehicles. Backspacing is 5.75, and a +25 offset.
Off-Road Ranger I
- 2,876
- First Name
- Todd
- Last Name
- Hoffmaster
- Member #
-
4284
- Ham/GMRS Callsign
- KJ7CRJ
- Service Branch
- Air Force
