US Northwest 2016 Toyota 4Runner TRD Pro high-end build

  • HTML tutorial

gino

Rank III
Launch Member

Enthusiast III

676
Boulder County, CO, USA
First Name
Gino
Last Name
Zahnd
Member #

0922

Ham/GMRS Callsign
KJ7JGE
UPDATE: no longer for sale.

Hey folks,

All the details, photos and contact info are on my site: 2016 4Runner TRD Pro

For some reason OB won’t let me upload photos from an iPad because it says they’re too large (hey Michael, add an open source image processor?). Thanks y’all.

For sale is my 2016 Toyota 4Runner TRD Pro in magnetic grey. It has 37,000 miles. I took a lot of time, and worked closely with Mule Expedition Outfitters to design a clean, purposeful, light weight, well-executed, reliable overland vehicle to be used for travel on and off highway, for expeditions of any duration, in any weather, day or night. We designed this vehicle to stay safely below GVWR at expedition weight, which is crucial. Comfort, versatility, and usability drove every design decision. The Goose Gear storage system and camp kitchen can be installed or removed in less than 10 minutes. The Baroud rooftop tent is on quick releases that take less than 2 minutes to install or uninstall. It has never done water crossings, rock crawling, towing, or anything where mechanical empathy wasn’t priority #1. I have taken it on many forest roads and trails in the Pacific Northwest, southern British Columbia, and northern California. All aftermarket work was done by Mule Expedition Outfitters, except for the CBI rear bumper and sliders, which were installed by CBI in Idaho. All regular service was done at Toyota of Portland, which is where I bought the vehicle new. It has been meticulously maintained, and I have all vehicle records. It was professionally detailed at Black Label Motoring. I’m about to build a new rig, so it’s time for this truly turnkey expedition vehicle to find a new owner. You can pick it up, and head straight out on an adventure. The gas tank is full, and it’s simply ready to go.

Performance Improvements
  • Old Man Emu suspension (medium front, heavy rear, 2.5-3” lift) was designed to match the load of this vehicle at full expedition weight.
  • Total Chaos upper control arms
  • ARB Safari raised air intake (aka snorkel)
  • ARB diff breathers front and rear
  • Matte black hood scoop wrap – reduces glare in low sun
  • BF Goodrich 285/70R17 KO2 all terrain tires
  • TRD Pro matching spare wheel and BFG K02 tire
  • Morimoto LED running lights
Under the Hood
  • ARB twin air compressor mounted on Slee Offroad bracket
  • SwitchPros control panel
  • Off-Grid Engineering + Blue Sea dual battery management system
  • VisionX Amber rock lights mounted to underside of hood (great for all sorts of things at night)
In the cabin
  • SwitchPros programmable digital control panel (also works with app)
  • SolidKit Dual Battery voltage monitor and switch
  • Goose Gear plate system
  • Goose Gear Camp Kitchen
  • Goose Gear dual drawer cabinet
  • ARB 50qt fridge/freezer
  • Partner Steel 22” stove
  • VisionX Amber galley lights w/switch in back of truck
Roof rack and details
  • Front Runner Slimline II roof rack system
  • 40” Front Runner dual light bar
  • James Baroud Evasion Evolution rooftop tent
  • Front Runner quick release tent system
  • ARB Touring awning with ARB annex fully enclosed room/tent
  • Rigid Industries side scene lights (left and right)
  • Front Runner shovel/axe carrier
  • Front Runner tie downs (4)
  • Front Runner stainless steel camp table, integrated with roof rack
ARMOR
  • CBI bolt-on sliders with kickouts
Front bumper details
  • SSO Slimline Hybrid front bumper w/30” Rigid Industries light bar
  • VisionX amber rock lights in wheel wells for low key camp lighting
  • Warn 10-S Platinum remote control winch w/synthetic line
  • Cascadia 4×4 Flipster Hawes license plate mount
  • Factor55 flatlink winch line shackle mount
Rear bumper details
  • CBI custom rear dual swing-out bumper with:
    • 2 trailer hitches (1 for trailer, 1 for bike rack)
    • integrated camp table
    • telescoping Rigid Industries work light (not currently plugged in)
    • custom integrated low-profile propane tank holder with Worthington 6lb propane tank. Hooks directly to Partner Steel stove.
    • CBI 2 Jerry can holder. Not installed because I’ve been using Rotopax, but I included photos so you can see it.
    • Rotopax mounts with 2 Rotopax fuel carriers
    • Worthington 6lb integrated propane tank on bumper arm
Truck Specs
  • 4.0L V-6 Engine
  • 5-spd auto w/OD Transmission
  • 270 @ 5,600 rpm Horsepower
  • 278 @ 4,400 rpm Torque
  • 4900 lb. towing capacity
  • ABS, Traction Control, Multi-terrain select, CRAWL Control,
  • Locking rear differential
  • Aluminum TRD skid plate
  • Auto-dimming rearview mirror
  • AC front and rear
  • SiriusXM AM/FM/HD/Satellite, seek-scan Radio
  • LCD monitor
  • Keyfob (all doors) Remote keyless entry
  • Front Fog/driving lights
  • SofTek Trimmed Leather Seats, Heated (Front)
  • 8-Way Power Adjustable Driver’s Seat w/ Power Lumbar Support
  • 4-Way Power Adjustable Front Passenger’s Seat
  • 40/20/40 Split Reclining and Fold-Flat Second Row Seat
  • Entune Premium Audio w/ Navigation and App Suite
  • HD Radio
  • HD Predictive Traffic and Doppler Weather Overlay
  • AM/FM Cache Radio
  • Sirius XM All Access Radio
  • Multimedia Bundle
  • Auxiliary Audio Jack
  • USB 2.0 Port w/ iPod Connectivity and Control
  • Advanced Voice Recognition
  • Hands-Free Phone Capability
  • Phone Book Access
  • Music Streaming via Bluetooth


D5D47426-6015-47E5-9196-E7AC4DD3E813.jpeg
 
Last edited: