Contributor III
Hello all! Been a member for awhile but new to the forums. Just thought I’d share my build.....a lot is custom or DIY because of the lack of aftermarket support for the first gen Xterra. Feel free to message with questions and enjoy!
AC Upper Control arms, 2” shackles and AAL, 2” body lift, total of 5” lift
35x12.5R15 KM3’s on 15x8 steelies, stock 4.9 gearing
Addicted Offroad front bumper
Warn m8000, warn steel fairlead, factor 55 prolink
Working on the rear bumper currently, custom fitting a smittybilt src tire carrier. In the pictures its sitting on a custom drop down roof rack with a fabtech tire hold down
RotoPax 3 gallon on rear hatch
MaxLux underlighting, ditch lights on custom brackets, 13” light bar on bumper, led fogs, led 7” rounds on roof mounted rack light bar
Rocky road outfitter super sliders
Warn manual locking hubs
Custom 3/16” oil pan skid plate
HD steering-grassroots centerlink, bandit 4x4 idler arm bushings, calmini IAB, HD tie rod adjusters
Lokka front locker and diff drop kit
Cobra CB
ARB awning and traction boards on roof with custom brackets
15LB powertank plus on board air compressor
Fenders cut...lots!
Custom rear cargo area shelving
Custom work on doors so all 4 are removable
AC Upper Control arms, 2” shackles and AAL, 2” body lift, total of 5” lift
35x12.5R15 KM3’s on 15x8 steelies, stock 4.9 gearing
Addicted Offroad front bumper
Warn m8000, warn steel fairlead, factor 55 prolink
Working on the rear bumper currently, custom fitting a smittybilt src tire carrier. In the pictures its sitting on a custom drop down roof rack with a fabtech tire hold down
RotoPax 3 gallon on rear hatch
MaxLux underlighting, ditch lights on custom brackets, 13” light bar on bumper, led fogs, led 7” rounds on roof mounted rack light bar
Rocky road outfitter super sliders
Warn manual locking hubs
Custom 3/16” oil pan skid plate
HD steering-grassroots centerlink, bandit 4x4 idler arm bushings, calmini IAB, HD tie rod adjusters
Lokka front locker and diff drop kit
Cobra CB
ARB awning and traction boards on roof with custom brackets
15LB powertank plus on board air compressor
Fenders cut...lots!
Custom rear cargo area shelving
Custom work on doors so all 4 are removable
Attachments
-
134.5 KB Views: 89
-
54.6 KB Views: 60
-
85.8 KB Views: 61
-
115.3 KB Views: 59
-
137.1 KB Views: 57
-
112.9 KB Views: 55
-
98 KB Views: 51