Search results

  • HTML tutorial
  1. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Took the Gremlin out on its maiden voyage last weekend. Loaded up my sons' Scout troop gear for a weekend Campout. Only got this one pic while they were still sleeping before we packed up, but it worked great. Only real issue I had was the trailer will rock or roll back and forth (side to side)...
  2. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Not sure yet. Been thinking about using some RV stabilizer jacks (not the scissor style), but have also thought about just some of the weld on tounge style jacks.
  3. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Haven't been working on the Gremlin through the holidays but it got an update this week! Stumbled across this utility shell on marketplace & it just so happened to be the right width. Unfortunately it's about 5" short, but I'm thinking that'll be a great spot to mount some accessories. Maybe fab...
  4. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Actually, you got it, i plan to use it for a fill port into a fresh water tank that I'll mount between the bed and the frame. But that's a ways down the road. LOL
  5. 3rd_Degree_Adv

    Oklahoma overlanders where ya at?

    My son and I followed the OAT from Altus to Mead a few weeks ago. Honestly it was pretty boring. Pretty much all blacktop. There was one section near Elmore City (roughly) that was interesting, curvy gravel road through private property that connected a lot of oil well sights.
  6. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    I've been pretty proud to adhere to the "built not bought" philosophy on this project. But I couldn't pass up the deal I got on this bed rack!
  7. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Dang!!!!
  8. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Busy day! Paint, safety chains, wiring, bed remounted, & toolbox mounted. Still several things to button up like; fender flares, propane tank mount, bed rack for RTT, & I'll probably fab a new rear bumper with recovery points. But..... I present to you the "GREMLIN"!
  9. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Got the new axle and wheels installed today! This raised the level hitch point up 9" overall and gives me 17" of clearance under the center of the axle. I'm pretty stoked to finally see it up off the ground. Tomorrow I paint the bare metal and hopefully we can mount the bed back on it Wednesday.
  10. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Got a bunch done on the trailer today. Removable 2" ball hitch welded up, Trailer tounge jack attached, corner caps on my front frame ends welded on, angle iron mounts for the front box welded on, and fabbed up a spare tire hoist behind the axle. I'm not that concerned with rear clearance...
  11. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    I seriously thought about it! But two factors kept me from doing so; 1) price - that would have cost me another $100 in material, & 2) functionality - I want to utilize the original suspension and change of frame elevation for different aspects of the trailer.
  12. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Now for the hitch. I ran the center joint 32" out from the front of the frame. No, this is not far enough for me to turn a full 90°, but I'm not done yet. I then took a 2" receiver tube and "notched" out roughly 6.5" so that it could set down over top of the 2x4 center frame rail. Once I got...
  13. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Got the frames welded together and the gussets installed. This frame freaking SOLID!
  14. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Thanks! Not yet, I'll work on that tomorrow. Today it was just setting on the tubing for measurements and pics.
  15. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Picked up a 20' stick of 2"x4" 11 ga. rectangle tubing and had it cut to lengths for me. Double checked my measurements and cut a few pieces to make them fit properly. Mocked up the new frame extension and tongue. Then took it all apart and welded everything up. I don't have much welding...
  16. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Three and a half cutting discs later I have notched both frame rails back 20". What I thought was a setback will actually be a blessing. This will make my frame extension & tongue way stronger. PLUS it won't cost me any extra material! [emoji106][emoji41]
  17. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Got my supplies in to finish patching the holes in the frame. After blowing a few more holes on the inner frame (even with my welder on its lowest setting) I ground the endcap off to get an actual measurement. 0.065, roughly 16-15 gauge, channel is what's welded on the inside. I don't feel like...
  18. 3rd_Degree_Adv

    Oklahoma overlanders where ya at?

    Welcome! I'm in Mustang.
  19. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Thanks for the info Nakman! I want to run a Lock 'n Roll coupler, but it's not in the budget at the moment. So I'm planning to build it with the ability to interchange the coupler depending on who's towing it or the terrain. For starters it will have a 2" ball coupler as my primary terrain is...
  20. 3rd_Degree_Adv

    Datsun Truck Bed Trailer

    Yeah, I needed to change the hubs out so I can run 5x5 hubs to match my Jeep. It was all around easier (unfortunately not cheaper) to just have a purpose built axle made that fit everything I needed.