Hey Everyone!
After posting all over the forums asking for recommendations and advice regarding making modifications to my truck, I have come to the conclusion (in hindsight) that I should have started a build thread. So this is our build so far, I will continue to update it as things go along, so far this is what we have. Any advice/comment is welcome btw, this is an ever changing build :)
Also thanks to everyone that commented on my other 9 million posts asking stupid questions, you've all helped me make it this far!
Current Modifications
- Prinsu Cab Rack.
- Prinsu cab rack noise dampener.
- Re installed weather proofing for cab rack mounts, and sealed them for moisture.
- Icon Stage IV Suspension.
- Icon Tubular UCA's.
- Icon rear AAL.
- ARB differential and transfer case breather kit.
- SpartanXCustoms Power Distribution system.
- SpartanXCustoms hood scoop light bar.
- MicTunning Dual mode (amber/white) 31" light bar - recessed bumper. (disassembled and waterproofed)
- CaliRaised Bumper light mounts.
- Roof Mounted Cree LED Spot beam work lights. (disassembled and waterproofed)
- Smoke Dark led covers for roof lights.
- Waterproof, heavy duty cabling for all power distribution components.
- Shapeways custom 3D printed button panel for the inside of the cab. (makes it look stock-ish)
- Iztoss Toyota blue LED push switches for bumper, scoop, roof and fog lights.
- American Flag recessed vynil door stickers (+10HP).
- OB emblems.
- Dual Plano 108362 roof mounted weatherproof cases 36". (Made my own mount brackets).
- Door Sill protectors.
- Smittybilt receiver hitch D-ring.
- K&N Performance air intake.
- MSD StreetFire Ignition
- Borla Exhaust
- HKS Air Filter
- Modified the bed to add 4 x d-rings on bed mount points.
- RCI Hi-lift mounts.
- Toytec extended reinforced brake lines.
- Blacked out all emblems and chrome parts. (Not sure why toyota ships these things with so much chrome).
- Passenger side floor mat eyelet holder things (the passenger side mat slides around when stock).
- 285/70/17 BFG KO2's.
- Bed mounted spare.
- Roof mounted maxtrax. (Made my own mount brackets)
- BAMF Cab mount chop plates.
- rear roof rack mounted WaterPort (removed when not in use)
- RCI lca, front, transfer case, transmission, fuel tank and read diff skid plates (aluminum)
- RCI Sliders with kickout, steel, no plates.
- ARB Safari snorkel.
- SCS RAY 10's in Gunmetal 17"
- C4 Fabrication tailgate mounted CB antenna mounts
- CAMCO Awning
Removed Modifications (replaced by other, better parts)
- Spidertrax 1.25 hub centric adapters. ---- REMOVED
- 8 layer dip on stock wheels. --- REMOVED
Future modifications (have parts, have not installed yet).
- CB Radio
- Toytec 1" body lift - MAYBE
- OME Carrier bearing drop kit. - DON'T SEEM TO NEED IT YET
- Diff drop kit. - DON'T SEEM TO NEED IT YET
- Icon Hydraulic bump stops.
- Front rubber bump stops (bigger than stock)
- roof rack mounted rotopax (fuel and water cells) - MAYBE
- Bushwacker fender flares. --- MAYBE
Future FUTURE modifications (since being placed in a purchasing freeze by the wife, i have not bought any of this yet).
- Dual Battery setup
- Solar? --- Maybe?
- +2 Long travel? --- Maybe
- C4 Fabrication front bumper.
http://www.c4fabrication.com/produc...verland-series-front-bumper-full-size-no-cut/
- C4 Fabrication rear bumper (high clearance)
http://www.c4fabrication.com/produc...and-series-high-clearance-rear-bumper-system/
Here it is.
After posting all over the forums asking for recommendations and advice regarding making modifications to my truck, I have come to the conclusion (in hindsight) that I should have started a build thread. So this is our build so far, I will continue to update it as things go along, so far this is what we have. Any advice/comment is welcome btw, this is an ever changing build :)
Also thanks to everyone that commented on my other 9 million posts asking stupid questions, you've all helped me make it this far!
Current Modifications
- Prinsu Cab Rack.
- Prinsu cab rack noise dampener.
- Re installed weather proofing for cab rack mounts, and sealed them for moisture.
- Icon Stage IV Suspension.
- Icon Tubular UCA's.
- Icon rear AAL.
- ARB differential and transfer case breather kit.
- SpartanXCustoms Power Distribution system.
- SpartanXCustoms hood scoop light bar.
- MicTunning Dual mode (amber/white) 31" light bar - recessed bumper. (disassembled and waterproofed)
- CaliRaised Bumper light mounts.
- Roof Mounted Cree LED Spot beam work lights. (disassembled and waterproofed)
- Smoke Dark led covers for roof lights.
- Waterproof, heavy duty cabling for all power distribution components.
- Shapeways custom 3D printed button panel for the inside of the cab. (makes it look stock-ish)
- Iztoss Toyota blue LED push switches for bumper, scoop, roof and fog lights.
- American Flag recessed vynil door stickers (+10HP).
- OB emblems.
- Dual Plano 108362 roof mounted weatherproof cases 36". (Made my own mount brackets).
- Door Sill protectors.
- Smittybilt receiver hitch D-ring.
- K&N Performance air intake.
- MSD StreetFire Ignition
- Borla Exhaust
- HKS Air Filter
- Modified the bed to add 4 x d-rings on bed mount points.
- RCI Hi-lift mounts.
- Toytec extended reinforced brake lines.
- Blacked out all emblems and chrome parts. (Not sure why toyota ships these things with so much chrome).
- Passenger side floor mat eyelet holder things (the passenger side mat slides around when stock).
- 285/70/17 BFG KO2's.
- Bed mounted spare.
- Roof mounted maxtrax. (Made my own mount brackets)
- BAMF Cab mount chop plates.
- rear roof rack mounted WaterPort (removed when not in use)
- RCI lca, front, transfer case, transmission, fuel tank and read diff skid plates (aluminum)
- RCI Sliders with kickout, steel, no plates.
- ARB Safari snorkel.
- SCS RAY 10's in Gunmetal 17"
- C4 Fabrication tailgate mounted CB antenna mounts
- CAMCO Awning
Removed Modifications (replaced by other, better parts)
- Spidertrax 1.25 hub centric adapters. ---- REMOVED
- 8 layer dip on stock wheels. --- REMOVED
Future modifications (have parts, have not installed yet).
- CB Radio
- Toytec 1" body lift - MAYBE
- OME Carrier bearing drop kit. - DON'T SEEM TO NEED IT YET
- Diff drop kit. - DON'T SEEM TO NEED IT YET
- Icon Hydraulic bump stops.
- Front rubber bump stops (bigger than stock)
- roof rack mounted rotopax (fuel and water cells) - MAYBE
- Bushwacker fender flares. --- MAYBE
Future FUTURE modifications (since being placed in a purchasing freeze by the wife, i have not bought any of this yet).
- Dual Battery setup
- Solar? --- Maybe?
- +2 Long travel? --- Maybe
- C4 Fabrication front bumper.
http://www.c4fabrication.com/produc...verland-series-front-bumper-full-size-no-cut/
- C4 Fabrication rear bumper (high clearance)
http://www.c4fabrication.com/produc...and-series-high-clearance-rear-bumper-system/
Here it is.
Last edited:
