Started in the summer of 16 with an 08 JKU X. If already had a really bad "lift kit" installed (basically springs/shocks RC i think) and 33's on OEM wheels.
Shortly there after added the winch and Hi-Lift mount
Added PS Aluminum Flairs and steel rocker armer and corner armor.
IDK why that keeps posting sideways.
Current State
Poison Sypder BFH Rear Bumper
PS Body mount tire carrier with dual rotopax mounts and High lift mount
Rock Krawler adjustable track bars FR/RR
Carolina Metal Masters 7075 Drag Link and Tie Rod with 1 ton joints
Teraflex rear track bar relocate bracket
Tom Woods 1310 drive shafts
KMC XC Machette beadlocks
35" Nitto Ridge Grapplers
KC Gravity Pro light bar/rock lights
12K winch with synthetic line
Fox 2.0 shocks and steering damper
SS brake lines
15# Power Tank
ARB Twin Air compressor with 2.5gal tank and air plumbed to both doors
Currie Anti-Rock front sway bar
Rough Country MLC-6
In the shop waining to install:
Rubicon express hydraulic bump stops
Teraflex 3" springs, short arms (8) and limit straps
13" rotors with dual piston front calipers & M/C
ARB Dana 44 air locker
4.56 gears
Dynatrac 35 spline CrMo axleshafts
GM L96 6 Liter truck engine
6L80E 6-Speed auto
Tranny Cooler
One the fence about:
Currie rear anti-rock
Keeping and locking the Dana 30. Likely going to build a Dyantrac ProRock 44
Going to a long-arm setup
Shortly there after added the winch and Hi-Lift mount
Added PS Aluminum Flairs and steel rocker armer and corner armor.
IDK why that keeps posting sideways.
Current State
Poison Sypder BFH Rear Bumper
PS Body mount tire carrier with dual rotopax mounts and High lift mount
Rock Krawler adjustable track bars FR/RR
Carolina Metal Masters 7075 Drag Link and Tie Rod with 1 ton joints
Teraflex rear track bar relocate bracket
Tom Woods 1310 drive shafts
KMC XC Machette beadlocks
35" Nitto Ridge Grapplers
KC Gravity Pro light bar/rock lights
12K winch with synthetic line
Fox 2.0 shocks and steering damper
SS brake lines
15# Power Tank
ARB Twin Air compressor with 2.5gal tank and air plumbed to both doors
Currie Anti-Rock front sway bar
Rough Country MLC-6
In the shop waining to install:
Rubicon express hydraulic bump stops
Teraflex 3" springs, short arms (8) and limit straps
13" rotors with dual piston front calipers & M/C
ARB Dana 44 air locker
4.56 gears
Dynatrac 35 spline CrMo axleshafts
GM L96 6 Liter truck engine
6L80E 6-Speed auto
Tranny Cooler
One the fence about:
Currie rear anti-rock
Keeping and locking the Dana 30. Likely going to build a Dyantrac ProRock 44
Going to a long-arm setup
Attachments
Last edited:
