Member III
Curious if anyone would be interested in my full length bed Drawer box. I made it middle of last year, it works great. Wood was all water sealed and then wrapped in outdoor carpet inside and out. I put small aluminum angle on the corners to help protect the box, definitively overkill but looks good and why not. The back i left a few inch section with a cap on it for a separate storage spot because i had planned on putting a solar setup on the truck and thought it would be a good place to conceal wires and whatever else. Im think about re designing a new box and making it out of aluminum or steel instead of wood. Kinda have some stuff that didn't fit quite the way i wanted it to in the bed and drawers. Total exterior dimensions 75x45.5x10 drawers are 18.5 wide 7.5 tall inside. Handel
Handful of dividers inside that can easily be moved around or removed. Box is super solid, I've had several hundred pounds of rock and other things on it before and never a sound of stress in it. I had about $400 in material in the build, if like to get at least that back out of it. If your interested and want to take a look at it lemme know. I'm located in gilbert az.
Handful of dividers inside that can easily be moved around or removed. Box is super solid, I've had several hundred pounds of rock and other things on it before and never a sound of stress in it. I had about $400 in material in the build, if like to get at least that back out of it. If your interested and want to take a look at it lemme know. I'm located in gilbert az.
