Search results

Id like soecifics in that please.

It depends on how you plan your trips. I drive from Baton Rouge to Clayton. Its a pretty long run, so I have given up on hunting a good dispersed site after that drive...or even entering a trail for that matter. Instead I head straight to Sarahs Creek campground. On a weekday you might be the...

See my post above. I missed the quote button to reply.

I have a video clip of that area on my instagram overland louisiana. It can be as difficult or easy as you want depending on your line. I have gone through it with guys in their 20s doing it mostly on three wheels? But im 53 and wheel mostly like a 53year old. I mean i have a lot of time and...

I havent had any issues. Id say all but a few miles of the traverse can be done in 2wd with decent tires and good ground clearance. I am lifted 3” on 33” tires. Its probably easier going west to east on tray because the tougher terrain will be on the downhill side of the track. I prefer taking...

I have done it in its entirety once. I love the area. I plan weekend trips there now and go to do the section you have skipped. I drive straight to clayton and take warwoman road up to sarahs creek campground and stay the night. Then a few miles from there take the travers track west. To me this...

Ill need to wait even longer since I am working all weekend. I have the RT sustems on my laptop but dont really understand that either, and I also have a data cable and memory card. I would definitely appreciate some help on this. Ill message you my cell and we can link up via text to see when...

no sir. I took another route and did a beefed up single battery set up.

I have installed a HAM radio in my rig. It is a Yaesu FTM400. I am looking for someone in our general area who has some ham experience to help me program it. If anyone is willing please let me know. I have no problem driving a couple hours for a little insight.

I appreciate and experienced HAM who has had the same issue chiming in on this. As a newb, it had me scratching my head as to what I was doing wrong. I do have a 2awg battery cable to re route and that still stands a chance to help, but you are right... clear as a bell with the fogs “off”. I...

Which lights are you running? A friend has his antenna mounted about 8” from a led ditch light and no static. I have been focused on other projects and havent come back around to trying to resolve this one yet.

lack of winch keeps me in check. Lol i think I met you at home depot in gonzales. Im off work tomorrow and thursday. I have to work this weekend but I should be off the following weekend. If you can squeeze a run in when Im off I might be interested in going.

I took a drive out there weekend before last. I saw only a few other vehicles. Stuart lake cg was closed and a sherriff parked at the gate. It had rained the night before and a few of the smaller trails I tried to explore were too soupy to risk without a 2nd vehicle. You should be fine as far as...

I have 2awg ground and power run from battery to a distribution block under drivers seat. One side of block powers the ham. The other powers audio equipment. I am prepared to run direct to battery if needed but have not implemented the things i wanted to try first. I have been busy with a dash...

I am new to HAM. Just installed the radio and studying for license which I aim to get as soon as libraries reopen. I have not been able to wrap my head around programming the radio with the RT software, so the only thing I am doing currently is monitoring a NOAA weather station about 60 miles...

Where/how do the filters install?

I suspect a leg of the 2awg in engine compartment needs reroute. If that doesnt resolve, then I will be stumped for sure.

I am having some added static/interference when fog lights are turned on. The fog run on the factory wiring harness but are diode dynamics brand lights. The radio power takes from a block under drivers seat that is supplied via 2awg direct from battery. The antenna is on rear hatch mount. Fogs...

Ill be doing a HAM radio install soon. In the meantime, I did a project to improve handling and droop. I added urethane bushings on front and rear sway bars, adjustable rear sway bar links, and a panhard correction bracket. Now that the sway bar and panhard are back to correct geometry she...

I have a 2017 4runner with an aftermarket rack and a RTT. I have to admit the RTT isnt the easiest thing in the world to access to deploy or put away up that high. I have the southern style offroad full length rack. It is low profile and I am able to leave two cross bars bolted to the tent and...