Recent content by SEOverlandAdventures

Awesome, I'll go with the 291. Thanks for the quick reply!

@smritte Which Sikaflex sealant did you use? The local Home Depot has the All Purpose Non-Sag Construction Sealant and the Self-Leveling Horizontal Joint Elastic Polyurethane Sealant (or is it a different type)? Sika 10.1 fl. oz. Sikaflex All Purpose Non-Sag Construction Sealant Polyurethane...

Here are a couple of progress pics. I removed the left side wall and cut the new piece this weekend. All of the bolts and screws were fairly easy to remove, but the front of the wall was secured by staples. It took a while to pry off the front and expose the staples so I could cut and pull them...

It is for sure. I'm going to have to add a brace on the rear of the old piece (before I take it off) so it doesn't fall apart into 2 pieces when removed. So on the front curved piece - the wrap is actually applied to the thin metal sheet that covers the top, so I am going to have re-use it...

Thanks, I will check them out.

Does anyone know who makes a roof rack / cargo basket similar to this one? I am looking for one that is about 11" high (if a commercially made one exists) to accommodate a Dometic roof top AC unit.

Latest update - so it's been over 2 weeks since I talked to the guy at BRX. Despite following up a week later, he has not called back or replied to my e-mail. So that's that, time to move on. I removed the roof last weekend and the left side panel. The left side wall is totally rotted out and...

Got it, thanks. I see on the RecPro site that the PVCRubber kit doesn't come with install instructions. Are there any others steps to be aware of in addition to what is in the posts above?

@smritte @OTH Overland The roof currently has a sheet of aluminum over the plywood. Would you recommend using the PVC Rubber instead of using the sheet of aluminum as the exterior surface or use both the PVC Rubber and re-using the sheet of aluminum? I pulled back some more of the exterior...

@smritte @OTH Overland Thanks to both of you for the detailed responses. They are very helpful and I am sure I will have some follow-up questions as I dig into the details. The side molding was attached with screws that run along the roof and down to the end of the molding the front. The...

I have a 2018 BRX Expedition trailer and the plywood sheet that is underneath the exterior of the roof is rotting out and needs to be replaced. I am trying to decide if I want to do this repair job myself so I pulled back a section of the exterior molding to try and determine if the roof just...