Enthusiast I
We have been using this rack for about a year but just swapped it out for an RSI SmartCap. The rack has been covered during the time it was on our 2020 Jeep Gladiator. We made a vinyl soft shell for it for the rack is in excellent condition. No issues with it, the thing is a beast. Ultimately, we swapped it out because we camp in bear territory a lot and have a fridge in the truck bed. So we wanted something a little more secure.
Pictures of just the rack on the truck and with it covered so you can see how well it has been protected during the year of use. Rebel Off Road’s description is below, the whole rack has been powder coated black.
Looking for a truly modular, make it your own bed rack system for your Jeep Gladiator JT? Look no further. We've created the XPLOR Bed Rack with customization front and center. With the ability to mount our carrier plates on the outside, inside and top of the rack, you can create the perfect setup for your next adventure.
The Ultimate Modular JT Bed Rack System
We went with 1/2" bolts for mounting to your existing factory frame rails and 3/8" carriage bolts throughout out the frame for added strength and reliability. Our powder coated racks are sandblasted, pre-treated with 4 stage iron phosphate wash with deionized water rinse. They receive a Tier 1 OEM Supplier basecoat of zinc rich primer and then are shot with a top coat of black fine texture powder coat finish.
Our rack allows you also to run either a Halo Rack on top or the Rhino Rack Pioneer platform for additional mounting/storage options. The XPLOR rack includes plenty of locations to mount lights, however, if you decide you need to make your own, feel free to drill into the frame and create your custom light setup.
You'll receive front, middle and rear uprights (Left to right) including their corresponding crossbars (Front to back). Four carrier plates for exterior side mounting. Six top channel braces, perfect for mounting our rooftop tent rail system or other accessories. You'll also receive a vanity plate for mounting behind the cut-out Rebel Off Road Logo, which you can powder coat or paint any color to match your Gladiator.
FEATURES:
BASIC SET UP INCLUDES:
Pictures of just the rack on the truck and with it covered so you can see how well it has been protected during the year of use. Rebel Off Road’s description is below, the whole rack has been powder coated black.
Looking for a truly modular, make it your own bed rack system for your Jeep Gladiator JT? Look no further. We've created the XPLOR Bed Rack with customization front and center. With the ability to mount our carrier plates on the outside, inside and top of the rack, you can create the perfect setup for your next adventure.
The Ultimate Modular JT Bed Rack System
We went with 1/2" bolts for mounting to your existing factory frame rails and 3/8" carriage bolts throughout out the frame for added strength and reliability. Our powder coated racks are sandblasted, pre-treated with 4 stage iron phosphate wash with deionized water rinse. They receive a Tier 1 OEM Supplier basecoat of zinc rich primer and then are shot with a top coat of black fine texture powder coat finish.
Our rack allows you also to run either a Halo Rack on top or the Rhino Rack Pioneer platform for additional mounting/storage options. The XPLOR rack includes plenty of locations to mount lights, however, if you decide you need to make your own, feel free to drill into the frame and create your custom light setup.
You'll receive front, middle and rear uprights (Left to right) including their corresponding crossbars (Front to back). Four carrier plates for exterior side mounting. Six top channel braces, perfect for mounting our rooftop tent rail system or other accessories. You'll also receive a vanity plate for mounting behind the cut-out Rebel Off Road Logo, which you can powder coat or paint any color to match your Gladiator.
FEATURES:
- Includes 3/8" black carriage bolts for assembling the rack
- Includes 1/2" mounting bolts for your bed rail
- Ability to customize the rack to your liking
- Offered in raw or textured black powder coat
- CAPACITY:
- 900 Lbs max capacity (Static, while parked)
- 750 Lbs max capacity (Dynamic, while driving)
- 22.5" Height from top of rack to top of the bed rail
- 20" Height from bottom of rack to top of the bed rail
- 40" from top of rack to the bed
- Ability to mount a multitude of accessories
Optional mounts & accessories available here - CAPACITY:
- 900 Lbs max capacity (Static, while parked)
- 750 Lbs max capacity (Dynamic, while driving)
BASIC SET UP INCLUDES:
- Qty. 3 cross bars
- Front, middle and rear brace bars including their corresponding crossbars
- Qty. 6 bed mounting points
- Perfect for mounting rooftop tents or other accessories
- Qty. 4 mounting plates (for mounting accessories)
- For mounting accessories to the exterior side of your rack
- Qty. 6 top channels
- Perfect for mounting our rooftop tent rail system or other accessories
- All necessary mounting & assembly hardware
