2nd Gen Tacoma big brakes with OEM parts.

  • HTML tutorial

nudavinci64

Rank III
Launch Member

Off-Road Ranger I

539
San Mateo, CA
First Name
Robert
Last Name
Shopshear
Member #

4088

Ham/GMRS Callsign
HAM: KM6LUN GMRS: WRJN599
I'll be attempting 2010+ 4runner 14WA Calipers and 348mm rotors this weekend. Mounting points should all line up fine. I am only worried about the hub and if the caliper mounting points are long enough with the tacoma hub to clear the rotor. I am running 17" Wheels which is also a requirement for the Tacoma. Ill be posting up on Tacoma World. Doing it to upgrade braking and be a Guinea pig for Low Range Off Road as they did not have a Tacoma to test it on.
 

Justin Forrest

Rank V
Launch Member

Influencer I

2,522
Shoreline, Wa
First Name
Justin
Last Name
Forrest
Member #

3598

I'll be attempting 2010+ 4runner 14WA Calipers and 348mm rotors this weekend. Mounting points should all line up fine. I am only worried about the hub and if the caliper mounting points are long enough with the tacoma hub to clear the rotor. I am running 17" Wheels which is also a requirement for the Tacoma. Ill be posting up on Tacoma World. Doing it to upgrade braking and be a Guinea pig for Low Range Off Road as they did not have a Tacoma to test it on.
Cool, post the TW link for me when you're done. Thanks