Search results

I do not have a picture of the final setup, only the picture below from mock-up. The picture shows a 1x1 spacer below the awning mount to see if that was high enough. It was and as I stated above and I welded two 1x1 pieces side by side to make a spacer equal in width to my cross bars. I...

5th Gen 4runner owner with the Ironman Deltawing XTR-143 And Victory 4x4 rack with 2” wide cross bars. Had same issue. I made spacers out of 1” square tubing that fit between the mounts and crossbars. Each spacer is made up of 2 pieces of 1” square tubing side-by-side and welded together for 1”...

18psi with TRD Pro rims on two different 4Runners with no issues. Beach driving.

I just finished mine yesterday and was afraid of this as well. Ended up stripping the original paint off. The original paint seems to be powder coat. I used a MAP torch to basically burn it off. Paint bubbles up and turns to powder. Takes about 5 minutes. Did it outside and with painting mask...

My DIY drawers in 5th Gen 4Runner. I chose this route for mainly same reason, high cost of buying them. I was also able to make the drawers lower height than most of those on market, thus giving me drawer space while still keeping good cargo space. The fridge is a 35l. I also have removable...

May want to also look at Victory 4x4 if you haven’t already.

They are white

These are DOT fog lights. Model number 50481. Includes original brackets. Adapters to connect to 4runner factory fog light circuit also included. Adapters may fit other Toyotas. $100 shipped.

Single row Xtreme Series. 30" Xtreme Series "SR" LED Light Bar | blackknightlighting Includes original stainless mounting hardware, which was never used in my install. Minimal use and works perfectly. No issues. Includes some wiring, but no switch or relay. $75 shipped.

Have a ‘14 limited 4runner with 20k+ miles on P285/70/17 Wildpeak AT3W. Been very happy with the tires. Great everyday road, great in rain, snow rated but i have only limited snow but no issues. Limited minor mud and no issues. Very good wear and low noise. Note the truck has a TRD PRO Fox...

I’ve been happy with them. Pretty bright. Had to make more mounting brackets for my install. Wish they supplied more than two of the right angle brackets. The Switch Pro dimming function does work with them. Just checked. :)

On my 4runner I am using the first Gen KC cyclones. I have a light in front and 2 between front and rear tires. Per side of course. I would also have one behind each rear tire but I have some reverse lights that light ground well so don’t need them. With your wheelbase maybe a 3rd one between...

Carova Beach, NC.

1/2”-13 as that is largest would easily fit through holes in my particular boards. I wanted to use largest bolt I could for sturdiness. And length will vary depending on your boards and number of them.

Not tire carrier, but maybe some food for thought. Custom board mounts secured to rack crossbars. Board mounts are made from stainless all-thread welded to plates. Knobs tightened down on boards to secure them. All-threads long enough for stack of up to 4 boards. Then a simple padlock at top...

I suggest also looking into Dobinsons. I have a 3”/2” lift and been very happy. They have different spring options based on extra weight. On the 4runner forum there is a massive thread in the 5th gen section with all the information and part descriptions. And the thread is watched by the owner...

Installed

Not vertical but does lock them in place. 2 Stainless all threads welded to plate which is secured to roof rack. All threads go through existing holes in boards. Thread knobs screw down to secure boards in place. Each all thread has two holes to allow small lock. One hole at height for 2...

I am planning my winch install on my 2014 4runner and I bought a Blue Sea e-series shutoff switch for power lead.

Yes just passenger side. The recalls are based on the components and construction. Varies between bags. My daughter’s JK is also passenger side. But my mustang is driver side. From threads over on 4runner forum its passenger side bag for our 4runners.