Search results

  • HTML tutorial
  1. brian0128

    2017 Manley ORV gear carrier.

    I’m getting ready to list this trailer up for sale due to the purchase of something bigger.
  2. brian0128

    Manley owners: coupler height?

    See photos for answer. That is with General Grabber 31x10.5R15 at 22psi and 300lbs in trailer plus lid, rack and spare.
  3. brian0128

    AT or MT Tire Pressure on a Trailer

    How do you determine your tire pressure for your AT or MT tires on your trailers? I am currently running General Grabber LT235-75R15 tires, Load Range C, Load Index 104/101S, 50psi max inflation, with 1985 lbs max load. My calculations are showing a recommended pressure of 18psi which seems...
  4. brian0128

    Oregon Trail’r DoDrop Alpha

    What’s in the tongue box? Pictures?
  5. brian0128

    Mountain State Overland Adventure X Fest, Covington VA

    Is the base camp at the sports complex or in the woods?
  6. brian0128

    New trailer

    The pics are awesome! Do you have a picture of the batteries and electrical setup?
  7. brian0128

    New trailer

    That's a nice rig! What's in all the cabinets?
  8. brian0128

    Trailer tongue box electrical setup help.

    My goal is to have 2 batteries (Battle Born 100aH LifePO4), shore power (NOCO GEN 2 20amp charger), Solar and 12V DC to DC charger (REDARC BCDC1225), inverter (Xantrex 2000) and a fuse box to have wiring run to various areas of the trailer. I've looked at multiple pictures of setups here on the...
  9. brian0128

    The ROAMER - Overland Trailer build

    Nice start!
  10. brian0128

    2017 Manley ORV gear carrier.

    I replaced the hubs with a set of Dexter replacements and bought a 3rd as a spare to have for trail repairs. The hubs from the factory had too much play due to the cotter pin not engaging the castle nut properly. A 1” ID washer from the local trailer supply company spaced the castle nut out so...
  11. brian0128

    2017 Manley ORV gear carrier.

    After doing a little research I found out the trailer has a 2200lb torsion axle with 3500lb idler hubs. Here are the specs for the hubs for anyone else with a Manley ORV. Specs: Application: 3,500-lb axles with #84 spindles Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel stud...
  12. brian0128

    2017 Manley ORV gear carrier.

    The outer bearing is a L44649. Now I have to go figure out what hub I have.
  13. brian0128

    2017 Manley ORV gear carrier.

    I used the trailer to get mulch today and loaded 20 bags and 4 bags of topsoil on each trip. I broke a wheel stud on 1 of the trips. I got home and jacked up the trailer and the hub had 3/8in of play. I will pull the hub to get part numbers off the bearings tonight.
  14. brian0128

    2017 Manley ORV gear carrier.

    I’m slowly gathering everything to complete the electrical in the tongue box. Today the Xantrex Prowatt S.W. 2000 came in and I was able to test fit it. It will only be able to be mounted sideways. I might need a bigger tongue box.
  15. brian0128

    batteries and charging

    I went with multiple Battle Born batteries 100ah due to their literature saying 3000-5000 cycles(approximately 75-80% of the battery capacity will remain after 3000 cycles) and their 10 year warranty. They have a page showing the math and it comes down to .35 cents / lifetime amp-hour for...